PV teeth, NV teeth, customized on demand.

Be sure to prevent rust.

The materials of welding rods are stellite 1 and stellite 12. Currently, stellite 12 is more commonly used. Regarding whether it meets the welding requirements of your factory, you can send us your specific welding process and equipment conditions for more information.

Composition and hardness inspection, size, and carbon content of steel strips, composition, hardness, and density of saw teeth, welding strength test (saw teeth welding strength, and butt weld welding strength), side grinding centering, tooth height consistency detection, etc.

 Of course, our stellite saw teeth are corrosion-resistant and will not rust, and the base material will be oiled.

Redwood, softwood, hardwood (oak, redwood), especially frozen wood.

The thickness difference between the front and rear ends of the wood after cutting with the stellite tipped bandsaw blade is within 0.1mm.

The life of a bandsaw blade is affected by many factors such as material selection, blade design and quality, wood types, cutting conditions, cutting method, correct use and maintenance, etc. There is no fixed time standard for when to replace band saw blades, as the service life will be affected by a combination of the above factors. However, the service life of Stellite alloy tipped band saw blades is significantly better than that of TCT band saw blades.

10 to 15 working days according to the quantities.

Alloy saw blade is HRC 46-47, and the regular blade is HRC 47-48.

The width is between 80 and 200mm, the thickness is between 0.8 and 2mm, the length can be customized as required; the saw teeth thickness is between 1.3 and 3mm.

Regular blade material is SK5, C75, and alloy saw blade material include D6A,51CrV4, 65Mn, etc. tipped with stellite saw teeth.